Beersmith 2 questions

Forum for all brewing related questions and information

Moderators: triple-oh_six, yeastmeister

Beersmith 2 questions

Postby justin.granger78 » Thu Nov 24, 2011 7:46 pm

I am in the process of setting up beer smith on my mac for my system and am running into some problems and was wondering if any of you could answer my questions.

1. I have to set my mash tun coefficient to around .79 to get the correct temperature drop(20 deg) of my infusion water before I add my grain. My mash tun is a 15.5 gal keg wrapped in insulation. Is this correct or am i using this wrong?

2. The est O.G. i was getting from Qbrew versus Beersmith with the same efficiency and grain extractions is a lot higher in Qbrew. Beersmith is actually closer to the real O.G.'s I have been getting lately(may not have been my thermometer after all) What is the best efficiency setting for a single infusion cooler(basically what I have) and fly sparing?
justin.granger78
 
Posts: 72
Joined: Thu Apr 28, 2011 1:20 pm

Postby jimmiec » Fri Nov 25, 2011 12:31 am

1) I use beersmith to calculate my mash infusion temperature. I just use the equipment default settings for the "Stainless Kegs (10Gal) - All Grain" and Water/Grain Ratio of 1.25 qt/lb. The temperatures work out pretty good. Are you really losing 20F when mashing in? I do not see a parameter called mash tun coefficient. However, there is the mash tun specific heat.

2) I have only used 75% efficiency but always get slightly higher. I don't mind the slightly higher alcohol. It all depends on your process (e.g. how slow you sparge, false bottum, sparge temp, etc.).
malt waster
jimmiec
 
Posts: 538
Joined: Wed Jul 08, 2009 11:45 am
Location: Lafayette

Postby justin.granger78 » Fri Nov 25, 2011 6:35 am

You are right it's mash tun specific heat, my bad. I was going to leave it @ 75% since that seems to be what I have hit the last few times and Im with you a little more alchol is a good thing IMHO. I just don't like coming out low. Well I got a new thermometer, hydrometer(broke mine), and tweaked my recipe with beer smith so we will see how things go Thurs. We been so busy @ work I had to take the day off just so I could brew. Making a scottish ale.
justin.granger78
 
Posts: 72
Joined: Thu Apr 28, 2011 1:20 pm


Return to DeadYeast Main Forum

Who is online

Users browsing this forum: No registered users and 2 guests

cron