igloo lids

Forum for all brewing related questions and information

Moderators: triple-oh_six, yeastmeister

igloo lids

Postby aleguy » Sun Aug 28, 2011 9:56 am

There was some interest from club members about the high-domed lids for the igloo ice cube coolers, so here are some links:

http://www.igloo-store.com/detail/IGL+22019

Williams used to sell an adapter that would allow a standard regulator to be used with a paintball tank. They no longer appear to do so:

http://www.williamsbrewing.com/BREWERS- ... 1C148.aspx

The three-gallon kegs from Chi company seem to have come up in price in the last few months, but they're still a good deal:
http://www.chicompany.net/index.php?mai ... 6d259236c0

I hope this helps anyone who is interested.
Last edited by aleguy on Thu Sep 15, 2011 12:00 pm, edited 1 time in total.
Never trust a skinny chef, a sober brewer, or a cat with thumbs!
User avatar
aleguy
 
Posts: 2112
Joined: Wed Nov 21, 2007 1:36 pm

Postby redtail28 » Fri Sep 02, 2011 8:23 am

If any one is looking for a Ice Cube Max with
the dome lids Wal Mart has them for 45 dollars
online with free shipping to a store near you.
" Jeder muÃ? an etwas glauben, und ich glaube, ich trinke noch einen."
User avatar
redtail28
 
Posts: 626
Joined: Mon Oct 15, 2007 9:02 pm
Location: Lafayette La

cooler for mashing

Postby sdspespo1 » Sat Sep 03, 2011 6:41 pm

I looked at coolers today. Is there a shape that is better. morebeer has the barrel shaped. there is the traditional shape and then the more square shape. Is there a better one to get depending on the location of the drain plug? the model that the lids were for has wheels and the drain plug is under the wheels. Any recommendations??
sdspespo1
 
Posts: 116
Joined: Thu Jan 27, 2011 7:50 pm

Postby aleguy » Tue Sep 06, 2011 8:51 am

This cooler is one that has been adopted for the rolling kegerator. It allows you to take a couple of three-gallon kegs anywhere and have draft beer easily.
for a mash tun, I recommend at least a 48-quart rectangular picnic cooler. I also think it would be wise to epoxy a piece of CPVC pipe into the drain hole (after drilling it out) to prevent crushing the foam which will result in leaks. Given that you probably want to drill it out anyway, It might just be easier to get a cooler without a drain hole. BTW the Rubbermade coolers seem to stand up to the heat better and are less prone to warping inside.
Never trust a skinny chef, a sober brewer, or a cat with thumbs!
User avatar
aleguy
 
Posts: 2112
Joined: Wed Nov 21, 2007 1:36 pm


Return to DeadYeast Main Forum

Who is online

Users browsing this forum: No registered users and 5 guests

cron