Stuff I need......

Forum for all brewing related questions and information

Moderators: triple-oh_six, yeastmeister

Stuff I need......

Postby triple-oh_six » Sun Jun 13, 2010 10:42 pm

Stainless crosses, 3 of them
purge valves, again 3
there's more but I have a buzz and have forgotten

where is cheapest?
triple-oh_six
 
Posts: 740
Joined: Sat Oct 13, 2007 1:04 pm
Location: Lafayette,La.

Postby yeastmeister » Tue Jun 15, 2010 4:34 pm

Stainless crosses...morewine. $6.50 but out of stock. Not expected to be back till August. The local graingers has them as well, but I believe its twice as much, you can search their catalog.

Purge valves - ebay is the only place I have found. Search there, and you can find the 1/8" ones, which should work. Fine the 1/8" to 1/2" bushings on ebay as well.
User avatar
yeastmeister
Site Admin
 
Posts: 1303
Joined: Fri Oct 05, 2007 6:41 am
Location: Lafayette, LA

Postby triple-oh_six » Wed Jun 16, 2010 4:54 pm

I tried finding the purge valves on ebay but didn't see anything like you have, maybe I'm overlooking them.
triple-oh_six
 
Posts: 740
Joined: Sat Oct 13, 2007 1:04 pm
Location: Lafayette,La.

Postby yeastmeister » Wed Jun 16, 2010 4:58 pm

http://cgi.ebay.com/Swagelok-Nupro-Whitey-SS-1-8-Purge-Valve-SS-4P-2M-/120541453675?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item1c10d49d6b#ht_500wt_737

The trick is to pick Business and Industrial as a subcategory. That eliminates all the automotive stuff.
User avatar
yeastmeister
Site Admin
 
Posts: 1303
Joined: Fri Oct 05, 2007 6:41 am
Location: Lafayette, LA

Postby aleguy » Fri Jun 18, 2010 9:35 am

+1 I paid a bit more than $30 each for my 1/2" purge valves new. It's about $10 each cheaper to go ebay. R&R Fittings may have some too. As for the stainless crosses, Budrock knows a local place that sells them for less than B3. Call him and ask. I think he told me it was in New Iberia, which isn't too far from you considering how far you commute to work. :wink:
Never trust a skinny chef, a sober brewer, or a cat with thumbs!
User avatar
aleguy
 
Posts: 2112
Joined: Wed Nov 21, 2007 1:36 pm

Postby triple-oh_six » Wed Jun 23, 2010 10:49 am

yeastmeister wrote:http://cgi.ebay.com/Swagelok-Nupro-Whitey-SS-1-8-Purge-Valve-SS-4P-2M-/120541453675?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item1c10d49d6b#ht_500wt_737

The trick is to pick Business and Industrial as a subcategory. That eliminates all the automotive stuff.


I made an offer and got them at $12.50 each, $44.00 for 3 shipped.
triple-oh_six
 
Posts: 740
Joined: Sat Oct 13, 2007 1:04 pm
Location: Lafayette,La.

Postby aleguy » Fri Jun 25, 2010 9:46 am

Yikes!!! Those are 1/8" purge valves.I'm not sure if you can get a single bushing to take you from that to 1/2". You may need to double up on the bushings which would end up costing you nearly as much as three brand new 1/2" purge valves. Good luck finding 1/8" FPT X 1/2" MPT bushings. I'm sure they exist, somewhere . . .
Never trust a skinny chef, a sober brewer, or a cat with thumbs!
User avatar
aleguy
 
Posts: 2112
Joined: Wed Nov 21, 2007 1:36 pm

Postby yeastmeister » Fri Jun 25, 2010 10:01 am

aleguy wrote:Yikes!!! Those are 1/8" purge valves.I'm not sure if you can get a single bushing to take you from that to 1/2". You may need to double up on the bushings which would end up costing you nearly as much as three brand new 1/2" purge valves. Good luck finding 1/8" FPT X 1/2" MPT bushings. I'm sure they exist, somewhere . . .


Oh ye of little faith....
http://cgi.ebay.com/1-Stainless-Steel-Bushing-Fitting-1-2-MPT-1-8-/200459398203?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item2eac4fac3b#ht_500wt_1154
User avatar
yeastmeister
Site Admin
 
Posts: 1303
Joined: Fri Oct 05, 2007 6:41 am
Location: Lafayette, LA

Postby triple-oh_six » Fri Jun 25, 2010 11:11 am

yeastmeister wrote:
aleguy wrote:Yikes!!! Those are 1/8" purge valves.I'm not sure if you can get a single bushing to take you from that to 1/2". You may need to double up on the bushings which would end up costing you nearly as much as three brand new 1/2" purge valves. Good luck finding 1/8" FPT X 1/2" MPT bushings. I'm sure they exist, somewhere . . .


Oh ye of little faith....
http://cgi.ebay.com/1-Stainless-Steel-Bushing-Fitting-1-2-MPT-1-8-/200459398203?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item2eac4fac3b#ht_500wt_1154
Thanks, ordering right now
triple-oh_six
 
Posts: 740
Joined: Sat Oct 13, 2007 1:04 pm
Location: Lafayette,La.

Postby redtail28 » Sun Jun 27, 2010 9:42 am

:lol: :lol: :lol: :lol:
" Jeder muÃ? an etwas glauben, und ich glaube, ich trinke noch einen."
User avatar
redtail28
 
Posts: 626
Joined: Mon Oct 15, 2007 9:02 pm
Location: Lafayette La


Return to DeadYeast Main Forum

Who is online

Users browsing this forum: No registered users and 5 guests

cron