Co2 manifold

Forum for all brewing related questions and information

Moderators: triple-oh_six, yeastmeister

Co2 manifold

Postby redtail28 » Mon Dec 01, 2008 1:21 pm

Does anyone have a parts list on making a manifold
to pressure up more than one keg?
" Jeder muÃ? an etwas glauben, und ich glaube, ich trinke noch einen."
User avatar
Posts: 626
Joined: Mon Oct 15, 2007 9:02 pm
Location: Lafayette La

Postby aleguy » Tue Dec 02, 2008 1:27 pm

I think it depends on whether you're using flare connectors or not. Zeeboz built one for Gulf Brew, I would PM him and ask.
User avatar
Posts: 2112
Joined: Wed Nov 21, 2007 1:36 pm

Postby Mob_Barley » Tue Dec 02, 2008 3:03 pm



Supply two air tools from the same outlet.

* 1/4''-18 NPT threads
* Anodized aluminum
* 200 PSI maximum

$1.99 from Harbor Freight online: ... mber=93979
Just purchase two 1/4" shut-off valves with integrated check valve from just about anyone online. You can even connect two of these babies with a 1/4" x close nipple and have a 4 valve manifold. You can configure the manifolds inline, or at 90 degrees. I bought some of these but haven't got around to making mine yet.
"Reality is an illusion caused by a lack of good beer."
User avatar
Posts: 311
Joined: Sun Oct 21, 2007 7:05 pm
Location: Baldwin, Louisiana

Postby aleguy » Wed Dec 03, 2008 11:06 am

Interesting idea, but I think Redtail is looking to supply more than two kegs in his kegerator. Most of the parts he will need are available at any good plumbing supply. Personally I'd go with flare connectors and use check valves downstream of the individual shutoff valves. everything else though should be easily obtained locally.
User avatar
Posts: 2112
Joined: Wed Nov 21, 2007 1:36 pm

Return to DeadYeast Main Forum

Who is online

Users browsing this forum: No registered users and 6 guests