Keg cutting jigs

Forum for all brewing related questions and information

Moderators: triple-oh_six, yeastmeister

Keg cutting jigs

Postby aleguy » Thu Apr 21, 2011 8:08 am

Here are a few links for you. Just remember to fill your keg with water before cutting so you don't get slag permanently stuck to the inside.
http://www.homebrewtalk.com/f51/simples ... ig-143048/

http://www.homebrewtalk.com/wiki/index. ... ng_the_Top

http://pacosarea.blogspot.com/2010/01/e ... p-cut.html


Not recommended:
http://www.instructables.com/id/KEG-LATHE/
Never trust a skinny chef, a sober brewer, or a cat with thumbs!
User avatar
aleguy
 
Posts: 2112
Joined: Wed Nov 21, 2007 1:36 pm

Postby thebuddrik » Fri Apr 22, 2011 7:13 am

I really like the last one. I am going build one like that so that it bolts on easily.
User avatar
thebuddrik
 
Posts: 391
Joined: Wed Sep 10, 2008 8:36 pm
Location: Lafayette, La.

Postby aleguy » Fri Apr 22, 2011 7:18 am

Thought you already had a jig. 8)
Never trust a skinny chef, a sober brewer, or a cat with thumbs!
User avatar
aleguy
 
Posts: 2112
Joined: Wed Nov 21, 2007 1:36 pm

Postby thebuddrik » Fri Apr 22, 2011 8:58 am

Its not good for my grinder. Clamping a grinder like the way I have done it before can ruin a $100 tool.
User avatar
thebuddrik
 
Posts: 391
Joined: Wed Sep 10, 2008 8:36 pm
Location: Lafayette, La.

Postby aleguy » Fri Apr 22, 2011 2:14 pm

The first one looks like it wouldn't hurt the grinder. It also looks like the simplest one to make. But if you build the keg lathe, Let me know how it works out.
Never trust a skinny chef, a sober brewer, or a cat with thumbs!
User avatar
aleguy
 
Posts: 2112
Joined: Wed Nov 21, 2007 1:36 pm

Postby thebuddrik » Mon Apr 25, 2011 6:17 am

The one I had made before was the second one. The clamps are bad for it.

This is the one I want to make:
http://pacosarea.blogspot.com/2010/01/e ... p-cut.html
User avatar
thebuddrik
 
Posts: 391
Joined: Wed Sep 10, 2008 8:36 pm
Location: Lafayette, La.

Postby aleguy » Mon Apr 25, 2011 8:51 am

Yeah, the second one doesn't look safe, either. The first one looks perfectly easy, but the one you are making looks like the best because you don't have to remove the spear first. Those retaining rings can get stuck pretty badly after a keg's been sitting in a coulee for 20 years. :wink:
Never trust a skinny chef, a sober brewer, or a cat with thumbs!
User avatar
aleguy
 
Posts: 2112
Joined: Wed Nov 21, 2007 1:36 pm

Postby thebuddrik » Mon Apr 25, 2011 11:32 am

I would NEVER cut into a keg without removing the spear!! Ten pounds of pressure at the right volume can kill a person!
User avatar
thebuddrik
 
Posts: 391
Joined: Wed Sep 10, 2008 8:36 pm
Location: Lafayette, La.

Postby aleguy » Wed Apr 27, 2011 12:18 pm

I would never cut into a keg without releasing the pressure! It would be nice to fill the keg with water so there's no slag stuck on the inside, but even if there's pressure, as soon as you cut through, it will bleed off. It's not like the top is going to suddenly come off and hit you in the face. I actually did cut into my first keg without releasing the pressure or removing the spear. A stale beer shower was the worst thing that happened.
Never trust a skinny chef, a sober brewer, or a cat with thumbs!
User avatar
aleguy
 
Posts: 2112
Joined: Wed Nov 21, 2007 1:36 pm


Return to DeadYeast Main Forum

Who is online

Users browsing this forum: No registered users and 1 guest

cron