Brass or Stainless fitting's?

Forum for all brewing related questions and information

Moderators: triple-oh_six, yeastmeister

Brass or Stainless fitting's?

Postby BIGALE » Fri Aug 01, 2008 8:35 pm

What are the pro and con's of either brass or stainless fittings? I have seen many a sight with all brass fitting's and many a sight with all stainless.
BIGALE
 
Posts: 20
Joined: Thu Jun 26, 2008 6:58 pm
Location: Lafayette, LA

Postby Imakewort » Sat Aug 02, 2008 9:18 am

stainless is the best, brass is fine I used to use brass but went all stainless, if you are going to use brass read this
it should be pointed out here what the difference between copper, brass and bronze is: copper is just plain copper, pure and simple. Bronze is a mixture of copper and tin. Brass is a mixture of copper, (sometimes) tin, zinc, and lead. While most people cringe at the thought of lead in their plumbing, lead in brass doesn't pose much of a problem because it is present in very small amounts (0-10%). If you are worried about the possibility of lead leeching from your brass parts into your beer, you can take John Palmer's advice and mix white distilled vinegar (5% acetic acid) with drugstore-variety hydrogen peroxide (3% concentration) in a 2:1 volume ratio and soak brass parts for 10 minutes. This will remove all of the lead from the surface of the brass parts, thereby eliminating the cause for concern about leeching.
Imakewort
 
Posts: 438
Joined: Mon Oct 15, 2007 11:44 am
Location: Afganastan

Postby aleguy » Sat Aug 02, 2008 1:04 pm

Why take the chance on brass? Stainless is safe and it lasts forever. once the initial expense has been forgotten, you'll be glad you have it.
User avatar
aleguy
 
Posts: 2112
Joined: Wed Nov 21, 2007 1:36 pm


Return to DeadYeast Main Forum

Who is online

Users browsing this forum: No registered users and 2 guests

cron